Thales
Gemalto Document Reader SDK 3.7.1.18

Rollup 2_1
- ePassport - add support for named curves in Chip Authentication.

Rollup 1_3
- Prevent MMMReader_RFInitialise from failing due to slow RF USB enumeration on some readers.
  If calling RFInitialise with Low Level API immediately after CameraInitialise, the RF may fail to initialise
  because the RF reader can take a few seconds after the camera to fully enumerate in Windows.  This can occur
  on MK2 Hybrid and QS2000.
- Fix check for USB power only flag on MK2 Hybrid so that RF antenna is powered off between reads when on USB 
  power only.
- Change default OCR setting to use overall and localized thresholding methods for better results across document
  readers.

Rollup 1_2
- ReaderExpo updated to display DG3 fingerprints.  Fingerprint(s) are displayed in same location as DG2 Photo.
  Use left/right arrow to scroll images.  Note: Must have EAC_ENABLED=1 and DG3_FILE enabled in Application.INI 
  with proper certificate settings in [RFCertificates] section to perform EAC and read DG3 fingerprints.
- ReaderExpo updated to display DG7 signature.  Signature image is displayed in the same location as DG2 Photo.
  Use left/right arrow to scroll images.  Note: Must have DG7_FILE enabled in Application.INI and EAC if DG7
  is EAC protected.

Rollup 1_1
- QS2000 cropping fix for over-crop of Spanish DNI card front-side due to dark area at top of card.
- Further decrease sensitivity of UV security check and log (level 3) threshold value of documents failing UV security check.
  A few good documents are failing UV security check due to some non-UV Dull features in the MRZ area.
